Note that the Bias (+8 v) appears on the tip, not the ring, of the rear panel jack. 73, KE7X
Fred Cady fcady at ieee dot org > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of paul alexander > Sent: Monday, April 27, 2009 4:57 AM > To: Steve Ellington > Cc: [email protected] > Subject: Re: [Elecraft] K3 Rear Panel Microphone Jack Bias Voltage > > Steve-- > > I tried just inserting a bare plug into the jack, with no microphone > wires attached and measured no bias voltage on the rear jack. One of > my first thoughts was that the microphone had a short in it, but, that > was not the case. > > Thanks for the suggestion. > > Paul Alexander > wb9ipa This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
