Hi guys,
This weekend as we started Helvetia Contest my friends K3 #293 had a strange problem.. Worked so far with all firmware. Draws a little over 3 Amps with 12w Output at full output FM on any band. During "Tune" is seems to tune with 5 watts which i have in my Config During "SEND" when i go from Low Power to High power above the 12 Watts.. Current increases to 8 Amps but no output more then about 12 Watts IN SSB ALC Meter gives the right ALC but no output is shown Monitor is OK as i hear myself As i do an ATU tune the upper display usually reads swr but now only gives 2 dashes -- ATU is working , relays are clicking and no fault is given by the firmware. Sometimes it give an error ERR TXG Receive is OK Is has all options built in and the latest modifications done... KRX KAT 100W DVR What could be wrong here?? All input is welcome... 73 de Tom HB9DOD KL5X K3 #29 -- 73 Tom mailto:[email protected]
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
