David, I had a similar problem with the powerpole connector being too loose. The problem was that my solder connection enlarged the contact to where it would not push all the way into the plastic shell. You can tell if it is properly seated by the way the contact clicks into place within the shell. Also, the small leaf spring inside the shell will be completely covered by the contact as viewed from the outside. I tried forcing the contact into the shell but that was like pushing a rope - if it won't push in easily it's not going in. Mine worked after filing away solder from the outside of the contact. The shape and fit are real tight. A proper crimping tool would be even better . Good luck, Fred
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
