I have got my K3 set up so that the number keys act as band keys. Each number key is assigned to a band and is activated by pressing the M>V key and then the appropriate number key.
The memory set up included memorising the VFO B frequency the same as VFO A or sometimes a different frequency but in the same band. I also have the M1 - M4 keys programmed to frequencies within each band. This has all worked very well such that when I change bands as described above the VFO B frequency also changes to the same band at the same time. Not any more however. This afternoon I suddenly found that the VFO B doesn't change frequency when I move to another band. The only way I can move it is by using the A>B key. Then it works fine with the pre-programmed M1 - M4 keys. I have tried reloading the firmware but it makes no difference. Has anyone else experienced this issue ? Has anyone any suggestions to restore the status quo ? Any ideas would be appreciated. Barry Simpson VK2BJ K3 # 1397 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
