U1 appears to be the wrong part. It should say "KX1 1.02". Craig NZ0R
K3/100 #25 K2/100 #4941 K1 #1966 KX1 #1499 -----Original Message----- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike KB4WJA Sent: Saturday, May 02, 2009 9:43 AM To: elecraft@mailman.qth.net Subject: [Elecraft] KX1 initial LCD test When I power up on the initial board test, I get only two backward h's in the right portion of the LCD. Any idea what the problem is? I went back over the work and reheated solder joints. I went through the manual again checked that I had instsalled all to this point. U1 seems to be seated okay in the holder. http://n2.nabble.com/file/n2768339/P5010129.jpg Thanks, Mike K1 SN #150 -- View this message in context: http://n2.nabble.com/KX1-initial-LCD-test-tp2768339p2768339.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
