Hi Johnny,
- turn the sub RX on
- set VFO A to the desired frequency and FM mode
- tap A>B twice to copy all A settings to B, then move B to the desired
frequency
- use BSET to make sure the sub's antenna is set to MAIN, then exit BSET
- set up squelch for main and sub (see SQ MAIN and SQ SUB menu entries)
This should do it. You should use the latest firmware release (3.11).
Let me know if you're still not getting the expected results.
73,
Wayne
N6KR
On May 3, 2009, at 4:58 AM, Johnny Siu wrote:
Hello Group,
My K3 is equipped with KRX3 and KXV3. When I operate at 145.650mhz
repeater channel with XV144, could anybody advise what is the right
setting so that I can monitor both the uplink 145.050 and downlink
145.650mhz at the same time?
I just don't know how to configurate the K3 so as to monitor the
uplink using the KRX3 subreceiver.
BTW, how I can use the S meter to read signal strength of the uplink
and downlink?
Thank you for your help in advance.
73
Johnny Siu VR2XMC
Yahoo!香港提供�W上安全攻略，教你如何防��黑客! ��前往
http://hk.promo.yahoo.com/security/ 了解更多!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
---
http://www.elecraft.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
