Erik N Basilier wrote:
> I installed the second receiver recently, and am totally addicted to the
> diversity reception. Using my R5 vertical as the second antenna, with my
> horizontal beam for the main. The R5 is of course useless as a transmit
> antenna on 40, but it picks up enough signal for receive (no tuner on it).
> Haven't put any extra roofing filters in the second receiver, and with the
> lower received signal strength on the vertical I doubt that I will need to.
>
> Now to my question: The Utility happily loaded the DSP firmware into the
> second receiver, but I didn't see how to set up the roofing filter
> configuration from the Utility, so I did it using the radio's menus. Surely I
> am missing something in the Utility? (Running the latest Utility and the
> latest firmware.)
There should be a radio buttons in the bottom-left corner of the
Cyrstal Filter COnfiguration dialog that allow you to select "Main"
or "Sub Receiver"... ?
~Iain / N6ML
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
