My SS AMP need 30~45w to get 1200w or so, I never try to see what will happen if I set the input power to 100w. Even the AMP have some room for that(I think) -- it use 16*MRF150. By the way, ALC cable not used. So maybe it is a good idea to add this function -- I hope it will be limit for per band,hihi.
73 de ba4rf/David On Fri, May 15, 2009 at 1:03 AM, K3JPS <k3jps....@gmail.com> wrote: > No worries; I didn't think you were rude. I've got pretty thick skin > anyway, hi hi. > > Anyway, does anyone else in the group think this feature would be > beneficial? > > 73, James. > > > > > On Thu, May 14, 2009 at 12:41 PM, David Ferrington, M0XDF < > m0...@alphadene.co.uk> wrote: > > > Sorry, didn't mean to be rude, started with 'just use the power control' > in > > my head and then realised you wanted a limiter, which at present there is > > not. -k > > -- > > All the world's a stage and most of us are desperately unrehearsed. > > -Sean O'Casey, playwright (1880-1964) > > > > On 14 May 2009, at 17:37, K3JPS wrote: > > > > Well obviously it is the power control. What I simply wanted to know > was > > whether or not the ability existed to set software limits on that > physical > > control. To me, it doesn't seem like a hard thing to implement in > firmware. > > > > The reason for asking is I'm limited in terms of how much output power I > > can run with an amplifier. If I wanted to tune with max drive being > > 40-50 watts, then I wanted to know if there was a way of setting limits > on > > the power control knob. I've made the mistake of adjusting power output > > instead of compression on more than one occasion. > > > > 73 James > > > > On Thu, May 14, 2009 at 12:10 PM, David Ferrington, M0XDF < > > m0...@alphadene.co.uk> wrote: > > > >> surely this is the PWR control - there is no way to set an upper limit > as > >> far as I know. > >> 73 de M0XDF, K3 #174 > >> -- > >> Do not meddle in the affairs of Dragons, > >> For you are crunchy and taste good with ketchup! > >> > >> > >> On 14 May 2009, at 17:07, K3JPS wrote: > >> > >> > >>> Dear all, > >>> > >>> I've checked the KPA3 manual along with the K3 manual, and didn't find > >>> any > >>> mention of a way to limit maximum output power with the KPA3. > >>> > >>> What I'd like to know then, is there something buried within the menu > >>> that > >>> would allow me to set max output to something like 30 - 40 watts? That > >>> way > >>> if I inadvertently adjust the CMP/PWR knob when it's set to PWR (and I > >>> mean > >>> to adjust compression instead), that it doesn't go above a pre-defined > >>> setting? > >>> > >> > >> > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html