Don, I don't have any evidence to indicate that you have another problem lurking around. I would have to defer to Wayne for speculation about why you did not see the HI SWR message yet experienced the PA shutdown. I do not know *all* the details of the power shutdown mechanism (but high SWR is one condition) and why no message was produced - Wayne would have to answer that.
Can you reproduce it with the bad cable? If so, perhaps additional data can be derived. 73, Don W3FPR Don Nelson wrote: > Don, > > Interesting that you have a message reporting high SWR. I have never > seen it and I have had MANY chances to see if it indeed does get > displayed when a high SWR causes the power amp to be shut down. > > Let's suppose for a moment that the mechanism that would display it did > not get executed. What other mechanism in the firmware would shut down > the power amp when I had the suspect cable connected and when the > suspect cable is replaced with a presumed better cable, I have no power > amp shut down? Am I to believe that there may be another problem? Any > suggestions? > > Don, N0YE > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
