Hello Eric! > I use my K3 mostly for soundcard digital and I've noticed something > peculiar. Wayne suggests setting the soundcard's outputs (Master & > Wave) to 50% and use the Mic Gain to drive the output until either 4 > bars of ALC show
Correct. > or the output power level is just below the target > power output set on the K3. I think this is a misunderstanding. There must be at least 4 bars of ALC. On the K3, the ALC indicator is based on audio input, *not* RF feedback. If you can't get 4 bars of ALC, you need more audio from the computer, or more LINE IN gain. If you have less drive, you will get Tx Power creep, because the system Tx gain is set based on the audio level being at least 4 bars of ALC. Hope this is helpful to you. 73, Lyle KK7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
