James, A string of dots from the K3 will give full power at a 50% duty cycle. Plug the paddles into the paddle jack and switch to CW - the internal keyer will go up to 50 wpm.
I suggest you do a pre-tune of the amp at low power, then use the CW keying to 'touch up' the amp controls. 73, Don W3FPR K3JPS wrote: > Dear group, > > I've recently acquired an SB-220. I'm new to linear amplifier operation so > please bear with me. I'd like to know if there is some way to get the tune > function in the K3 to act like a pulser or a keyer sending dits at 40-50wpm? > > I'm learning how to tune this amp, and I've been using FSK-D to send a tone > using the hand mic. > > Or if there is another way I can get the K3 to tune using full peak output > power but keeping average power down, I'd like to know. > > 73 de James K3JPS > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
