If I change the power output on 6m it immediately jumps from 8W to 13W and then on to 120W as usual. So I cannot dial up any power between 8W and 13W on 6m. I have reloaded the (latest) firmware and recalibrated the transmitter gain using the utility. On the first run through at 5W the procedure stopped with an error at 20m where the utility did not set the power to 5W but 5.2W. I rather stupidly did not write the error message down. I then continued and successfully calibrated at all bands on 50W- now it works all the way through on 5W too. I can't see how that could affect the 6m power jump however.
I thought that I had read about this just recently but a search of the archive did not bring it to light. I'd be grateful for any advice. Thanks and 73 Stephen G4SJP ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
