I have the same set up and have had the same problem, it was fixed in the last couple of updates. If you dont have the latest 3.19, I would give it a try, that has fixed it all for me. 73 Merv KH7C > OK, here's the story: > > I've been having a strange problem with my K3. > > I'm using it with an external keyer (don't ask why - it's what I want for > now), and also a footswitch. > > I've been on six meters a lot (I'm mentioning this in case the band means > something) - and I've been doing a lot of CQing in CW. I use a Henry > amplifier, which has clunky, slow T/R relays. Accordingly, I've got the T/R > delay on the K3 set to go along with that. To prevent any switching back to > receive on slightly-too-long pauses in my CQ, I usually step on the > footswitch to keep the relays closed during the CQ. > > SOMETIMES (but not always), after the CQ is completed, and the K3 goes back > into receive, there is a constant, low-level cw sidetone monitor still being > generated. It's not as loud as the monitor usually is. If I tap the paddle > to force it back to transmit again, the low sidetone goes away when it > returns to receive. > > I don't recall seeing anyone complain about this. Any ideas as to cause, > and, more importantly, a solution? > > Thanks/73, > > Steve > NN4X > EL98jh > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > >
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
