Hello Ron, > ----- Original Message ----- > From: "Ron Edmon" <mailto:[email protected]> <[email protected]> > Sent: Friday, June 19, 2009 10:40 PM > Subject: [Elecraft] DSP and IF Filters > > I have been going through the manual on the K3 trying different combination > of DSP and IF as well as NR filters trying to reduce atmospheric noise. I > find the noise level to high pitched which fatigues me after an hour or so > of listening. I've listened to the "Hear It" external DSP filter employed ~ > Ron, N6SC
Yes, I'm going through the same sort of thing with my K3, which I've only had assembled for a week, so inexperience with this rig may be a lot of the problem. If the station is strong, the high pitch is not as noticeable, but if a weak station or if you have to narrow the bandwidth, this is really a problem. This is primarily noticed at night when I may have an S6 to S9 noise level, which consists of what I term as 'atmospheric noise' (a rushing wind sound) and not static crashes or weather related sounds. Obviously, if you have the bandwidth too narrow, you can't shift or you will lose the cw signal, unlike ssb usage. I'm going to follow through with a few of the settings given in replies to this posting and will share any I have. Incidentally, I've also experimented with using F2-1 NR setting (as well as others), which helps if the signal isn't too weak and you lose too much audio from the NR insertion attenuation. ...Edwin ____________________________________________________________ "Once you have flown, you will walk the earth with your eyes turned skyward, for there you have been, there you long to return."-da Vinci http://bellsouthpwp2.net/e/d/edwinljohnson ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
