Apparently the threshold setting is not working in psk31 in firmware version 3.14 on the K3. Even the maximum threshold setting of 30 does not prevent random characters from appearing.
From page 33 of the latest manual: Hold TEXT DEC , then select ON using VFO B. Below the DATA icon you should now see a T, showing that text decode is enabled. • Adjust the threshold (THR) using VFO A. Start with THR 0. Higher settings prevent text decode on weak signals or noise. Tap CWT to exit text-decode setup. 73, Tom-N2YTF -- View this message in context: http://n2.nabble.com/Threshold-not-working-in-PSK31-in-firmware-3.14-tp3139592p3139592.html Sent from the [K3] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
