It won't be the first time I've posed a dumb question to the reflector, but I do try to answer more questions than I pose, and put enough info on the K3 Wiki to keep my RTFM account in the black. ;-)
http://www.zerobeat.net/mediawiki/index.php/K3_Wiki_at_ZeroBeat.NET --- On Tue, 6/23/09, Don Wilhelm <[email protected]> wrote: > From: Don Wilhelm <[email protected]> > Subject: Re: [Elecraft] K3 QSK? > To: "Don Rasmussen" <[email protected]> > Cc: "[email protected]" <[email protected]> > Date: Tuesday, June 23, 2009, 7:37 PM > Don and all, > > This is not a specific comment on your situation, I am just > using it as one example. IF everyone would read > through the menu settings for the radio, I believe a lot of > these type questions would be answered. Yes, a bit of > logical thought about the effects of each setting is in > order too, but an understanding of the configuration > settings available in any radio (the K3 included) can be had > by just looking through the available menu settings - "it is > in the manual" (plus a few of the K3 firmware release notes > for the new functions). For *all* radios with menu > settings, an understanding of the menu items available will > help you to set up the radio the way you want it. It > is true for the Yaesu 817, the K2 and the K3 and many > others. You do not know the radio until you know what > is contained in the menus. > > 73, > Don W3FPR > > > Don Rasmussen wrote: > > Think I have it, had set TX DLY to 20, it is normally > 8. Somehow I considered this would only apply to VOX mode. > ??? > > > > Set it back to 8 and QSK is good again. > > > > Thanks for the reports... > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
