Hi, I'm setting up the rig to operate from a remote location over the Internet. On page 43, the manual has a very brief description of how to turn the radio on and off. If I activate a relay remotely to ground Pin 8 on the ACC socket, I can turn the radio on. Will it hurt anything if I use a relay that keeps this pin on ground the entire time the radio is ON? Or do I need a momentary contact relay to just give it the brief connection to ground? Then to turn it off, the manual states that a PS0 cat command should be sent. Then deactivate the POWER ON signal. Specifically, after sending a cat command PS0, will I simply have to remove the ground from Pin 8 on the ACC socket? Or how will this be accomplished? Thanks for the input. Art KZ5D
**************An Excellent Credit Score is 750. See Yours in Just 2 Easy Steps! (http://pr.atwola.com/promoclk/100126575x1222585065x1201462786/aol?redir=http://www.freecreditreport.com/pm/default.aspx?sc=668072&hmpgID=62&bcd=Jun eExcfooterNO62) ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
