Yep, same problem here with DXBase. Whenever I hit a callout and the mode is different than where the K3 is at, the offset comes into play whether I am going to SSB or CW. Once I am in a mode, say CW and I select another callout everything is fine.
If I double click a callout when switching modes everything is fine. This all happens only if the "Auto CW VFO offset on mode change" is on. Not a big problem once you get used to it. 73, N2TK, Tony -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Iain MacDonnell - N6ML Sent: Monday, June 29, 2009 12:56 PM To: Brian Alsop Cc: [email protected] Subject: Re: [Elecraft] V3.19 It's because clicking on the spot results in (at least) two actions: 1) Set the radio frequency to 50.125 2) Set the radio mode to SSB Unfortunately the second step invokes the CW offset adjustment, and leaves you <pitch>Hz off where you wanted to be. If your software set the mode before setting the frequency, it should work as you expect. I had the same problem, using the DXLabs Suite. ~Iain / N6ML Brian Alsop wrote: > Using the CW offset feature to go from SSB > CW modes . Works as > advertised. > > However when I click on a spot when in CW mode to go to USB something is > odd: > Example: > In CW mode at 50.110 > Click on spot on 50.125 > Radio goes to USB mode at 50.124.47 -- 50.125 minus CW offset of 530 Hz. > > Anybody else seeing this? > > I also wonder why one have to use reverse CW to get to an exact CW freq > from USB frequency mode change. Yes, this was stated in release. > However, why should it matter? I personally always use normal CW. > 73 de Brian/K3KO > > > ------------------------------------------------------------------------ > > > No virus found in this outgoing message. > Checked by AVG - www.avg.com > Version: 8.5.375 / Virus Database: 270.12.94/2208 - Release Date: 06/29/09 05:54:00 > > > ------------------------------------------------------------------------ > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
