David, You have it right. I might point out that there is room (just barely) for an RCA jack near the key jack. Take a look at my website www.w3fpr.com article on the K2 Fixed Audio Output and you will see the location I refer to. Of course, you could use one of the transverter holes in the top cover, but you would need to provide a disconnect should you ever want to completely remove the top cover for service.
73, Don W3FPR [email protected] wrote: > Hi All, > > I've just picked up a second hand K2, with KX60V installed. > > I believe I can use this for keying external amps, but just wanted to check > that I'm on the right track. > > Looking at the circuit diagram of the KX60V I'm thinking I would use pins 1 > and 2 on J2. Would I be right with this?? > > Thanks > > David, VK2NU > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.375 / Virus Database: 270.13.5/2220 - Release Date: 07/05/09 > 17:54:00 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
