The reason you don't update the manual is because when someone with an older K1 goes to the website they can still see where they were informed to cut a trace and they can follow the footsteps back to be able to re connect that trace if they remove the KAT1 or something of that nature. Sometimes maintaining revisioning and having manuals for all of the versions in the field is important. The online documentation has to support those who have lost their documentation and/or a person who bought an older board unit used. They'll need too be able to open it up and read why that trace is cut in case they have to debug an issue or something....
On Tue, 2009-07-07 at 20:33 -0700, Anthony Hardwick wrote: > Okay, so here's confirmation that I am, in fact, an idiot. After re- > reading the manual for the KAT1 several times, I FINALLY noticed the > warning that "the following steps are only necessary if you have > revision D or earlier of the K1 RF board." > > Well, to help out idiots like me, I still suggest that a revision to > the manual is warranted. I bet I'm not the only one who will miss > that little note. Since I can't imagine there are any RF boards still > going out at this point from Elecraft that are Rev. D or earlier, why > not update the manual for the KAT1 at least? > > > On Jul 7, 2009, at 8:19 PM, Anthony Hardwick wrote: > > > > If I'm wrong and I overlooked proper instructions then I apologize, > > but I have been through the documentation several times, and can't > > find any evidence of up to date instructions for the revision RF board > > I have. > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
