I also had issues with this issue and Wayne suggested that I look at my TXG VCE setting and move it to 1.0 ~2.0 db I have mine set to 2.0 and it seems to help.
73Dan AB3EN Greg Williams-4 wrote: > > I suggest that you make sure that you have run the "Calibrate > Transmitter gain " in the configuration section of the Elecraft K3 > Utility. That fixed an issue I had that was similar to yours. > > Greg VK3VT > > Subject: > Re: [Elecraft] [K3] Power variations in K3 / 3.19 > From: > ab2tc <[email protected]> > Date: > Thu, 9 Jul 2009 07:35:09 -0700 (PDT) > > To: > [email protected] > > > I have this problem also, not only after power up, but after each band > change. My favorite workaround is to change mode to data FSK, switch to > dummy load, then press PTT for a couple of seconds. Back to SSB and I > have > full talk power immediately. > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ----- Dan AB3EN -- View this message in context: http://n2.nabble.com/Power-variations-in-K3---3.19-tp3231601p3241381.html Sent from the [K3] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
