On 12/07/2009, Don Wilhelm <[email protected]> wrote: > Julian, > > Does your transverter have an "enable" input signal - hopefully 5 volts > active and 0 volts inactive? If so, you can connect it to the K3 AUX > I/O pin 7 (XVTR ON) and set the menu CONFIG: XVn ON. > Of course, this AUX I/O pin is shared with TX INH, so if you are using > the TX INH function, that will not work. > BUT, you can always decode the band data outputs for the transverter > band you are using and use that for a transverter enable (or gate the > PTT input to the transverter with the band data decoded). >
It doesn't appear to. I think that's something unique to the Elecraft range of transverters, unfortunately. -- Julian, G4ILO G4ILO's Shack: www.g4ilo.com G4ILO's Blog: www.g4ilo.com/blog.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
