I am not sure how big the K2 knob is. Could you use a K3 knob that already has the dimple?
Willis 'Cookie' Cooke K5EWJ --- On Mon, 7/13/09, dw <[email protected]> wrote: > From: dw <[email protected]> > Subject: [Elecraft] Drilling an el-cheapo finger dimple into the K2 tunning > knob > To: "Elecraft_List" <[email protected]> > Date: Monday, July 13, 2009, 9:21 AM > I used a wood countersink with a > rounded drill tip. > Went down about 2/8 inch. > I found that a metal strip is just below the plastic > surface of the > knob. > I went through this. > I made sure it was smooth, but it would have been better if > I'd had a > machine shop do this. > > Of course it doesn't look professional. > But it works smooth and is a functional improvement on the > cheap. > > Duane > N1BBR > -- > [email protected] > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
