Brett Howard asked: > Is there a way to use the internal keyer in the K3 with N1MM or do you > have to use the DTR/RTS in the key jack method?
N1MM Logger does not support the KY software command that makes use of the K3's internal tuner. I believe there are implementation reasons for this limitation, in which case it might not be an easy limitation to remove. You can use: - DTR or RTS on the radio control port without any additional hardware (with some limitations that are described in the N1MM Logger documentation); - DTR or RTS on any other serial port with a keying transistor to the K3's key jack; or - parallel port keying to the K3's key jack (I don't know whether this can be made to work under Linux, though - it requires the DLPORTIO driver under WinXP). All of these can be affected by Windows timing problems. The standard recommended solution is the WKUSB (or a serial WinKeyer), which unfortunately requires an extra box. 73, Rich VE3KI K3 #1595 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
