Paul, That should be fine. The K2 itself is speced for up to 15 volts input. If you want a refinement over the K2 display of voltage, measure the voltage right at the terminals of a fully charged internal battery.
If your battery was not fully charged when you cranked up the power supply, check the voltage over the next several days and re-adjust the power supply as needed. 73, Don W3FPR pkhjr wrote: > I installed the battery in my K2 and adjusted the voltage up on my astron. > The voltage on the astron is 14.4 and the voltage on K2 meter is 13.8. Is > this to high or should I drop it down a little? > Tnx Paul > > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.375 / Virus Database: 270.13.21/2252 - Release Date: 07/21/09 > 05:58:00 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
