I suspect that the K2 was originally a Rev. A kit and the original owner also purchased the Rev B upgrade Kit which included new pc boards and the additional components required for the Rev B boards (I recall that a complete set of resistors was included), so there will definitely be some parts left over. The upgrades received a new serial number and that one is close to mine (#3273), which I built as a Rev B upgrade. There is a set of upgrade instructions on the Elecraft web site.
73, Bob N7XY On Jul 25, 2009, at 1:32 PM, H. M. Motley, Jr, wrote: > I received 9 responses with offers to build the K2 and/or the KX1. > In addition I received 3 or 4 other responses directing me to > builders. I appreciate all responses. I need to put all the > information into a spreadsheet (I'm a former accountant) so I can > quickly compare the various responses. Some quoted prices, others > needed more information. > > Here's more information: > > KX1 -Includes the 30M adapter. This kit has not been started. The > box has been opened but all parts are in original parts bags and/or > wrappings. The owners manual is REV A 10/10/03. The serial number > may be 000100 if that's what that number on the box is? > > K2 - a very early kit which includes the following manuals: > > Rev A - 06/14/99 > REV C - 04/19/00 The original owner must have ordered the newer > ones later! > REV E - 02/16/03 > > The original owner sorted and checked all parts and has them in > boxes in envelopes identifying the contents of each. A set of > prewound coils is in there too. There is also a box identified as > "Revision B Components kit". In this kit components are all in > original bags or wrappings. It has a new serial number of 03309. > The original owner included a literal "mountain" of printed > messages from the various Elcraft reflectors. The actual building > of the kit has not been started. No soldering gun, wire cutters, > screw drivers etc have ever approached this kit! :-) Frankly with > all the various changes that have occurred I would not know where > to start. > > Again thanks for the interest shown in this project. For those who > needed more information before quoting a price let me know if what > I provided above is sufficient. Those who inquired if I had > received their messages, be assured I did but the response has been > a bit overwhelming. For now I'm posting this to the reflector > rather than respond to each of you individually. > > 73, > Puck, W4PM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
