I have noticed some strange behavior in the K3 regarding the noise blanker (NB) and the sub receiver. If I have the sub receiver turned off and am listening to the main receiver with the noise blanker turned on, then enable the sub receiver, the noise blanker is turned off in the main receiver. I then have to turn it back on for the main receiver, then enter B SET and turn it on for the sub receiver. The CONFIG:VFO IND has to be enabled to even allow you to turn on the sub receiver's noise blanker. If CONFIG:VFO IND is not enabled, I can not find a way to turn on the sub receiver's noise blanker. The noise reduction (NR) on the other hand, works completely differently. The settings are maintained as you turn the sub receiver on and off, and you can turn on the noise reduction in the sub receiver by turning it on for the main receiver. Seems to me the two functions should work the same way. I use the noise blanker a lot. It works very well on my power line noise, but using it with the sub receiver is not very straight forward. What am I missing here? Thanks, Charlie, K4ZRJ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
