Yes, of course. And verified the dummy load was working correctly with an MFJ 259. N5GE wrote: > Doug Person wrote: >> Hi Folks, >> >> Installing the KPA3 and KAT3 is pretty straight forward. That's why >> I don't understand what's wrong. Looks like ANT1 and ANT2 are both >> open. I can see the leads physically connected in the right order to >> the KAT3. The KAT3 is enabled in the menu, as is the KPA3. But when >> I tried to run the calibration program, it says the SWR is too high. >> When I attempt to transmit with just 5 watts, the internal SWR meter >> indicates very high SWR. >> >> I admit that I am recovering from major surgery (with the usual >> assortment of drugs) and my brain may not be fully functional yet, >> but I can't see what I may have done wrong... >> >> Any thoughts? >> >> Thanks, >> >> Doug -- K0DXV >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> >> > Did you connect a dummy load to the antenna connection? > > Tom, N5GE > >
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
