I've sent an email over to Aptos hoping that they may know what's going on with my K3. A few days ago, I noticed that sometimes the amount of line-in gain required for a digital signal from DM780 varied quite a bit. Some days, all it took was a level of 14 and I'd have about 6 bars of ALC. On others, gain had to be set to nearly 25. Well, today it seems that my line-in died all together or at the very least has become heavily attenuated. I now have to crank the line gain all the way up to 60 to get about 3 bars ALC!!
I have checked, and no audio settings have been changed on my PC. I even plugged in a set of speakers to the line out jack on the PC and everything is fine. What is weird is that sometimes, fiddling around with the mic/line input settings in the Main menu fixes things for a while, but then it's back to almost zero input after a while. Any suggestions? Lyle seems to think it could be a bad solder. I'm going to let the rig cool off and see if the problem occurs while cold. I've also reloaded the current firmware twice, plus went back to 3.19 just to make sure it wasn't a FW issue. -- 73 de James K2QI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
