Rick, This comes up frequently, and thankfully was solved by firmware version 2.04r. Earlier versions had a toggle to change the sidetone source between U6-25 and U8-4 in support for older K2s without the wiring change for the sidetone source.
If your K2 is above SN 3000 or below that and has had either the KIO2 or KPA100 added, your sidetone source must be U8-4, and for those few K2s that do not fit that description, the source is U6-25. Enter the menu for STL, edit the parameter and set the level to something reasonable (20 to 40 range), and then tap DISPLAY to toggle between the two sources. Stop when you hear sidetone and exit the menu - problem solved. 73, Don W3FPR Williams, Richard (OAG/CPG) wrote: > I set my K2 aside for a week and when I came back to it, I have no sidetone. > I have ST L set to 135, but turning it up all the way makes no difference. > It's transmitting a signal no problem. Just no side tone. Any suggestions > would be appreciated. Rick VE9HF > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.392 / Virus Database: 270.13.49/2294 - Release Date: 08/10/09 > 06:10:00 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
