Took a trace of what I was hearing... http://www.livecomputers.com/K3/shift.01.jpg
red trace is 2.7Khz BW with shift=.05 green trace is 2.7Khz BW with shift=.01 On Wed, 2009-08-12 at 18:30 -0700, Brett Howard wrote: > Yea it seems that there is a lot more low frequency response when set > to .01 rather than .05. I get a lot of low frequency rumble out of the > speakers when in .01. I'll see if I can get some frequency response > captures of it... > > On Wed, 2009-08-12 at 20:12 -0500, k5nu wrote: > > Crafters, > > > > I have just installed 3.25 beta. Maybe I am blind to an obvious setting > > etc., but when I change from shift 0.1 to 0.5, my 2.7 filter bandwidth sure > > sounds better. At the shift setting 0.1, the radio audio sounds puffy > > noisy at the same settings at the 2.7 bandwidth. Have to stick to the 0.5 > > setting for now. > > > > Maybe I will discover the difference, but so far I don't find it. The > > radio sounds terrible in the wider bandwidth filter with the shift setting > > at 0.1. Just my observation. Maybe erroneous. > > > > Also when changing the shift settings, the radio goes to a narrower filter > > automatically as the change takes place. I guess that is how it is > > supposed to be. > > > > Shortly put, the different shift settings in the menu make my radio sound > > different in the 2.7 filter range. > > > > 73, Mike K5NU > > ______________________________________________________________ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:[email protected] > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
