Benny, If you are willing to use the K3 Utility Command Tester, then you can read or set the K3 power using the "PC" command - see the K3 Programmers reference for a full description. PC005; should set the power to 5 watts, and PC100; should set it to 100 watts. Set up 2 macros to make the switch easy. You could add commands to use the K2 extended mode for finer control at low power levels if you wanted.
73, Don W3FPR Benny Aumala wrote: > Thanks, Dick > > I tested that. > -Go to Elecraft Utility program. > -Go to Configuration > -Restore saved config including power level. > It takes 40 seconds to restore, > Then K3 RESTARTS. > No, this is not what I meant. Rolling with > that shaft encoder is much more handier. But not handy > that, either. > > Imagine yourself working barefoot 100W and need some > help with linear to get that station. Adjustments are too long. > I need to switch between two power levels, not roll. > But this is just a whisper of wish. > > Benny OH9NB > _______________________________________ > > Dick Dievendorff kirjoitti: > If you have a computer connected, you can also set power with the PC > command. I realize not everyone has or wants a computer connected at all > times, but it is another way. > > I think it is a rotary shaft encoder, not a potentiometer. > > Dick, K6KR > > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.392 / Virus Database: 270.13.58/2304 - Release Date: 08/15/09 > 06:10:00 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
