Is there an ability for the K3 to display information on the P3 screen? Such that it may be used as a larger output for RTTY/CW/PSK decoded information. This way one can not only see more text but also use decode while seeing both VFO freqs.
~Brett (KC7OTG) On Sat, 2009-08-15 at 19:23 -0700, Wayne Burdick wrote: > In answer to some of the questions heard at the hamfest and posted here: > > - the P3 can go left or right of the K3 > > - the screen refresh rate will be selectable; the prototype was > running at about six times/second, but we hope to increase that to 20/ > sec > > - there are eight programmable switch functions that could be used as > instant K3 band selects and/or other K3 or P3 functions > > - it could be used with other rigs with only firmware changes, but we > have no immediate plans in this regard > > 73, > Wayne > > > > > Sent from my iPhone > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
