Hi Don the problem was again in the bfo. I re-did again cal fil using the tom's procedure. I tuned bfos with the graph spectrum. Finally the bfo is shifted exatly of 1.2 khz. the same values of cw nor bfo applied to cw rec cal , produce a perfect centered filters in cw rev! what does it mean? luca ----- Original Message ----- From: "luca amendola" <[email protected]> To: <[email protected]> Sent: Monday, August 17, 2009 1:19 AM Subject: [Elecraft] k2 receiver shift problem fixed, now tx shift problem
> hi friends > my last message was blank because I sent it via web! > as tom and don suggested I re-calibrated all filters with the cal fil > option and the receiver shift now is fixed. > unfortunally I found a minor problem in tx mode: my tx frequency is around > 0.6 khz up. > so I'm serching help again. hihi > any suggest? > thanks > luca > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
