Eric, WA6HHQ wrote: Our primary concern is with the water-soluble flux solder, which leaves a conductive residue on hand soldered boards.
------------------------------------------- Also some water-soluble fluxes remain corrosive at *room temperature* until they are removed from the board, and it's *hard* to get them completely off without special facilities. The result is a board that will slowly disintegrate as the traces are eaten through, becoming intermittent and eventually failing altogether weeks or months after the flux was used. These fluxes are designed for automated soldering facilities were the boards undergo a powerful machine washing right after soldering that removes all the flux. But brushing at home or even washing in the sink won't do it. (I know one fellow who said he successfully removed the flux by running the boards through his dishwasher, but I'd not try it. Rosin flux simply works too well to go through all that even if it does work and even if the board survives the dishwasher.) Ron AC7AC ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
