Steve, You are mainly checking for solder bridges in that test, and a solder bridge in much more likely between pins 1 and 2 than it is between 1 and 40.
73, Don W3FPR Steve Howard wrote: > On page 21 of the K1 manual it says to check the adjacent pads on U1 > Does that mean checking across ? > for ex pin 1 to pin 40 , pin 2 to pin 39 etc or does that mean > pin 1 to pin 2, then pin 2 to pin 3 etc > thanks, > > Steve > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
