>>Try hitting A>B twice after setting up the CONFIG:XVn RF menu entry.
Thanks Eric, but that is not the problem - (by after I assume you mean after leaving the config menu) I have both VFO's on 216.987 (more or less) but when I try to retrieve a value from the memory like 216.(anything) it forces the active VFO to 219.9992 (in USB). That seems to be the lower limit of what the K3 finds "acceptable" for a RF=222 transverter when the frequency is entered all at once (memory or keypad+enterkey) So it looks like there is a lower limit of 2 Mhz below the transverter frequency.* See my other note. My fictitious 215/21 MHz transverter lets me use frequencies down to 212.999 - not lower. The magic 2 MHz limit again. The problem I am having with recalling a frequency now is that the K3 thinks the 216.987 frequency belongs to my transverter #3 (the real 222 transverter) and automatically switches to that band - and of course with that transverter defined as a 222 transverter, it will not accept the frequency. I think maybe I need to insert the fictitious one as transverter #3 and re-enter all the other ones up through 8. But that is too much of a pain since I only need two frequencies I am happy with what is memorized in vfo A and B. * I just thought it was really strange that I could tune the radio to that frequency, memorize it OK and then find that the radio refuses to use the stored frequency later ... -- View this message in context: http://n2.nabble.com/K3-XV144-XV432-tp448253p3496538.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
