Eric Swartz - WA6HHQ, Elecraft wrote: > Hi Roy, > > As of today, we have made the following enhancements to all K3s leaving > the factory: > > K3 VFO TUNING NOISE REDUCTION (requires f/w 3.25 or later) > K3 AUTOMATIC FRONT END PROTECTION (1 wire mod) > K3 IF OUTPUT BUFFER GAIN MOD (For the P3, LP-PAN etc) (1 resistor value > change) > > Based on feedback form those that have tried the preliminary release of > these changes, we are comfortable with adding them as standard K3 features. > > Please note that the last item, the IF Output Buffer Gain mMod, is > slightly different than the similar N8LP mod some have been performing > on their K3s independently. We determined that only one value needs to > change to implement the gain increase for the IF output. We are changing > R8 from 1K ohms to 13K ohms. (Those that have made the N8LP mod may > also leave it as is.) > > Also, we are releasing new beta f/w today, MCU 3.27/DSP 2.24. This is > already available on the web page at: > > http://www.elecraft.com/K3/k3_software.htm > > This release includes: > > *ADDITIONAL NOISE REDUCTION (NR) IMPROVEMENTS. > *AUTONOTCH depth improved. > *SHIFT=.01 FIXED WITH LOW SIDETONE PITCH (300 Hz). > *VFOs NOW TUNE DOWN TO 490 kHz. > > We never sleep in Aptos! :-) > > 73, Eric WA6HHQ > > Roy Morris wrote: >> I would like to know if is the intention of Elecraft to incorporate the K3 >> AUTOMATIC FRONT-END PROTECTION mod and the K3VFO TUNING NOISE REDUCTION mod >> in future PC boards. If so, I plan to install these mods in my K3s. Roy >> Morris W4WFB >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html >
Yup...my Auto-Notch works now!! Good goin' guys!! I've been told by family members that I tend to gush, but honestly, where else can you find the level of customer service that we have with Elecraft? Truly terrific!! -- 73, Dick ka1oz Middleborough, MA Radio: Elecraft K3/100(Kit) SN 859 Antenna: Titan-DX ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
