Where I think it should be reported is in the kxxx area of the menu. So in the area where you turn on the krx3 and knb3 and what not you could have a non editable entry for kesp3 or some other creative part number.
On 8/30/09, Brian Alsop <[email protected]> wrote: > I wonder since this is a "software detected" mod at setup if the > firmware program could report it is there. (alternatively, maybe the K3 > can report it like it does key err) I'm not keen on zapping the front > end with a high signal level from an uncalibrated source to find out if > it is working. > > There perhaps may be other mods that could be detected in software and > reported as well. > > 73 de Brian/K3KO > > Brian Alsop wrote: > >> How does one test this without a calibrated signal source? >> >> Why was 80M chosen for the test frequency? Most ops have preamp off and >> many have attenuation in. >> >> It appears one needs something like an 80db over S9 sig for it to cut in. >> >> 73 de Brian/K3KO >> >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
