Jim Harris schreef: > Hi Folks, > > I have a K3 on it's way form Aptos that will arrive Tuesday, Sept > 8th.....would have here today except for a minor hiccup. But, not > complaining....just a lesson in patience. I've been worrying over the > assembly and operating manual the last few days. I like to contest using FSK > RTTY. Looks like the only way to get the FSK from the computer to the radio > is through the Accessory port on the radio. Looks like there are several > other functions that go through the connector. The manual seems a little shy > on how to gather all the data from apparently several locations and get it > into the connector. Is there a cable available to do that or is one left to > their own to fabricate such a spiderweb thing. I applaud the built in > interface isolation transformers only to find myself faced with having to > engineer and build a break out cable that connects among several pieces of > hardware. Do I have this thing all wrong or do I need to start contemplating > building a breakout cable? > > Thanks for any help. > > Have a good day and 73. > > Jim, W0EM > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Hi
An example of a rtty cable can be found at http://www.pi4cc.nl/personal/pc2a/k3/ Peter ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
