I wanted to tell the group about my latest experience with Don Wilheim W3FPR. I got 2 months ago a fully loaded K2 in very clean condition and even it was working fairly well,it had some issues with bad alignment having the four filters not well aligned plus excessive power output on some bands and also not enough power on cw on other bands,the RX was quite as my K3. So,I called Elecraft to ask if they could realign it for me,they said to me on the phone that the best engineer in the whole country who could do the best alignment job on my radio was Don,so with that excellent reference certainly after contact him I shiped my K2. The radio arrived yesterday and If I was happy before with it, now I am way happier,it receives quiter,better audio quality than before and the TX audio is super,the radio changed completely after his good alignment work,the turnaround delay was just 11 days in the whole process,radio spent more time travelling than at his bench,he even sent me a detailed sheet with all the work done in my radio. Guys I have to tell you that this is a profesional service and he deserve my respect.I will recomend him to work on any of your K2's for sure.Serious decent engineers like Don to service Elecraft radios is what we need. Thanks again Don,radio is working great now/ AD4C
"The difference between genius and stupidity is that genius has its limits". -- Albert Einstein --- On Sun, 9/13/09, Don Wilhelm <[email protected]> wrote: From: Don Wilhelm <[email protected]> Subject: Re: [Elecraft] xv432 To: "ron" <[email protected]> Cc: [email protected] Date: Sunday, September 13, 2009, 6:39 PM Ron, It certainly seems that way to me - those are Normally Open contacts and the relay coil is activated by 12T which is only active during transmit. Disconnect everything from the Ant jack (J1) and measure the resistance between the center conductor of J1 to ground - it should be fairly high if all is well. 73, Don W3FPR ron wrote: > am i thinking right that k10 grounds during xmit and is open on receive. i > think it's stuck in xmit on mine. > ron > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
