John,
I used the W2IHY EQ (not Plus) with both my K2s to better control the mic audio on my Heil Proset with the HC-4 and HC-5 elements. It worked great and fixed the lack of sensitivity I was experiencing without the EQ in line. Without the EQ, I could not get the K2s VOX to be as sensitive as I preferred. I also made good use of the Noise Gate built into the W2IHY EQ. Connecting it was no problem since I was only interested in VOX operating and not PTT. I simply connected the mic output on the EQ to the mic input on the K2.you're done! It sounded great. The Plus version gives you more bands to adjust (I believe), but BASS and TREBLE were all I ever needed to have fantastic audio. I have since purchased a pair of K3s which have the EQ and Noise Gate built in and have sold the W2IHY and one K2 on eBay, but you should have great reports when you get it hooked up. Good luck, Bob K5WA >>>>>>>>>>>>>>>>>>>>>>> Message: 1 Date: Wed, 16 Sep 2009 09:07:54 -0700 (PDT) From: john <[email protected]> Subject: [Elecraft] W2IHY EQPlus and K2 To: [email protected] Message-ID: <[email protected]> Content-Type: text/plain; charset=us-ascii Hi everyone, I wish to know if anyone has tried out this combination and if what did they have to do to get it to work properly etc, many thanks. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
