Thanks for that Joe, reassuring to know that levels higher than 10 can be accommodated without problem.
>as long as the AGC is set to >reasonably limit audio levels. Well, I use AGC-S and have never felt the need to change any of the other agc parameters so they are all set to default values - presumably this is ok ??? Trevor G0KTN -------- Original Message -------- Trevor, If you have AGC enabled in the K3, the Line Out level can be increased considerably beyond 10. Although I find Line Out at 10 works very well with the DigiKeyer input level at 3:00, I have run the Line Out as high as 70 without distortion as long as the AGC is set to reasonably limit audio levels. 73, ... Joe, W4TV > -----Original Message----- > From: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Trevor Smithers > Sent: Thursday, October 01, 2009 6:49 AM > To: elecraft@mailman.qth.net > Subject: [Elecraft] K3 Line out level and Digikeyer > > > For digimodes like WSPR I use a Microham Digikeyer and set > the K3 Line Out level to 10, which > is the maximum recommended before the possibility of > distortion is introduced. At this level I have > to set the Digikeyer RX input control to max to obtain proper > decoding etc and being at maximum > leaves no room for further adjustment. > > I usually like to set in/out controls to around 50% but in > this case it would mean setting the K3 > Line Out to around 40 to be able to reduce the Digikeyer input by 50% > > So, is Line Out level 10 still the max before > distortion/saturation of the output transformers occurs > or is there any headroom. If 10 is still the number then > fine, as the object is to provide the > cleanest signal to the DigiKeyer soundcard even if the input > does have to be set to max. > > 73 > Trevor G0KTN > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html