Hugo, That sounds like a programing deficiency in the Microham MK2. The fact that the K3 defaults to K30 on power on is documented in the Programmer's Reference as default. If a device needs to use an extended mode command, it should query the state - the K3 command can be used as a GET or a SET, so the programmer can determine the state before issuing the command.
73, Don W3FPR Hugo pa4la wrote: > I am playing with my Microham MK2 and have learned that, > > the K3 must be in extended (k31) command mode for the MK2 to switch correct > between audio or fsk data modes > > > > When the K3 is powered on, the mode setting is always standard k30. > > Putting the k31 command via a terminal is not a big issue but it would save > a couple of mouse clicks :) > > > > Is there a way tot save the k31 setting or a way to make k31 the default > setting? > > > > Tnx in advance, > > > > Hugo pa4la > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
