Mike Kasrich wrote:
>
> TxG error is appearing only on 40m. xmit ok on all bands swr is fine.
> but showing error on 40.
>
Check for a bad solder joint around the 40m toroids on the filter board.
You can probably scrape the insulation from top side with an X-Acto knife
and re-solder without having to remove the toroid. I had a similar problem
on 60m with one of my units.
http://www.mail-archive.com/[email protected]/msg75799.html
73, Bill
--
View this message in context:
http://n2.nabble.com/TxG-update-tp3760478p3760658.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
