Earl, There is a Mark/Shift and Pitch Selection - See the manual page 31. Set to your data mode (I assume AFSK or FSK-D), then hold the PITCH button - rotate the VFO A knob to tell the K3 what mark frequency and shift that you are using. If you are using a computer application, the mark frequency and the shift must match in both the K3 and the application.
73, Don W3FPR Earl wrote: > I just received my K3 S/N 3223 (FW 3.30/DSP 2.26) back from Aptos and > I now seem to have a problem with the Shift FC not correct for > DATA/FSK-D mode. Crystal Filters:2.7-5Pole, 1.8-8 Pole and 250-8 pole. > > The center star is at *1.36 and it needs to be at *2.21. > When I narrow the BW the signal disappears, but I can get it back by > manually moving the Shift Control to 2.20. > > I have compared all my CONFIG and MAIN settings with a local with a K3 > and they pretty well match up. > > Any ideas?? > > Earl N5ZM.. > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
