To me there is no difference between 3.30 and 3.41. Same low freq. response.
However, for my needs it is OK. Yes, I'm adjusting shift and width.
There is one problem with the new 3.41- the DSP high pitch noise level is
higher (3dB or so) than with 3.30.
Condition: RF gain at 12 o'clock AF set for normal listening level with good
headphones.
Antenna switch is being used to ground the antenna. Listen to the band noise
on 20 or 17m and ground the antenna. Now compare internal DSP noise to band
noise by using antenna switch
Do the above with 3.30 and than 3.41. My K3 SN is above 3000.
I like 3.30 and I'm hoping that DSP gain distribution/noise level in future
firmware will be the same as in 3.30.
There is also difference in DSP gain between 3.30 and 3.41.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
