K7WIA wrote:
>
> When I go to the tune mode the current starts at 23.5 amps and creeps up
> to 25 amps within 1/2 second.
> the power out is 99.7 watts. and the Hi Current warning comes on...
> supply voltage is 14.1 in stand by and 13.3 in tune shown on the K3
>
> on the lower HF bands I have no problem.
> on 10 meters 106 watts out and 18.3 amps 13.6 volts
>
> I have the latest firmware installed and have done the Transmitter gain
> calibration.
>
> where do I look to make corrections?
>
> Ed K7WIA
>
PS the SWR on the K3 showes 1.0-1 on 10 meters and 1.0-1 on 6, but the
Array Solutions swr meter shows 1.15 on 6
--
View this message in context:
http://n2.nabble.com/HI-CURRENT-warning-on-6-meters-tp3818740p3818803.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
