Dick:
Wayne introduced the following change at 3.10. Just reverse the
following procedure:
* CW VOX OFF BY DEFAULT ON POWER-UP: Some stations using PC control
> may inadvertently key the K3 in CW mode on power-up if VOX CW is in
> effect. If this is an issue at your station, locate the CONFIG:CW WGHT
> menu entry and tap '4', changing VOX NOR to AUTO OFF. This will make
> CW VOX default to OFF when the K3 is turned on.
73,
Gary, VE1RGB
-----Original Message-----
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of PA3CW
Sent: October 16, 2009 12:00 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Loosing VOX setting during power cycle in CW mode
I posted a question before about this issue, that i notice only after the
latest firmware update. When VOX is ON in CW and switch the K3 off and on
again, i loose the VOX setting and have to press the VOX button again to be
able to transmit in CW. It does not keep the latest setting. This does not
occur in LSB, where the setting is kept. Is this a known issue?
Thanks,
Dick PA3CW
--
View this message in context:
http://n2.nabble.com/Loosing-VOX-setting-during-power-cycle-in-CW-mode-tp383
6009p3836009.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
