I have just realised my mistake. I can find no reference to it in the manual but in searching the archives (again) I found a posting which mentioned the 4.2kHz (AFAIR) bandwidth limit imposed by the DSP. So, it would seem that things are working as they should- I was confused by the filter setup which apparently allows the setting of bandwidths higher than this on all modes.
Have I got this right? 73 Stephen G4SJP On 16/10/2009 18:10, "Stephen Prior" <[email protected]> wrote: > > I have just fitted the FM filter to finish off my complement (now 13, 6, > 2.7, 0.5 and 0.25). I used the K3 utility to set the bandwidth (13kHz) and > I have all the square boxes ticked (checked) so that, in my understanding I > should be able to go up to the full bandwidth of the filter in all my other > modes should I wish. > > However, whether I use the width control or the xfil button, the FM filter > (in FL1 of course) cannot be brought into play, the width simply stops at > the width it did prior to fitting the FM filter. > > It's no big deal, I bought the FM filter to play on the top end of 10m from > time-to-time, not to use enormous receive bandwidths in other modes, however > I was of the belief that the full width should be usable in every mode so > long as it is enabled on a per mode basis. > > I am wondering if there is something I have overlooked, and 'yes', I've read > the manual! I am on the latest beta firmware. > > 73 Stephen > > G4SJP K3#980. > > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
